服務熱線
13313705507
電機試驗過程中，如果采用調壓或調頻方式起動，電機的起運過程相對平衡，相反，當電機按照正常運行電壓起動時，電機會有比較明顯的抖動現象；同樣，正常運行的電機，突然斷電了，也有類似現象發生，有時候還會伴有比較明顯的噪聲。
機械共振作用
當電機運行中的機械系統所受激勵的頻率，與該系統的某個階段的固有頻率相接近時，將會發生明顯的共振現象，出現明顯的位移共振，有時會因為振動作用而產生比較明顯的聲音。電機啟動或斷電運行過程中，所發生的“抖動”就是一種共振的具體表現。
該類問題在變頻電機的使用過程中也時有發生，變頻電機可能在某些頻段的運行效果特別好，而在其他頻段可能存在明顯的電磁噪聲，其根本的原因是由于電磁共振的作用。
慣性狀態改變的具體表現
電機啟動過程及停止過程都是一種慣性改變的過程，改變慣性的過程，即運行對象受力改變的過程，改變的時間越短、受力越大，狀態改變即越明顯，直接的物理表象為人的直覺可以感受到的振動，對于電機產品而言，可能是聲音和位移的變化。
為此，電機安裝使用過程中的固定非常必要，例如通過電機底腳面、端蓋法蘭面與安裝基準進行固定，必要時增加其他限位措施。在電機運行過程中，會因為難以規避的振動問題發生固定的松動問題，因而定期的保養和維護特別必要。
Those who have participated in motor tests or are actual users of motors may have encountered a situation where the motor may shake during startup or power outage. This issue has also been raised by fans. Today, we will have a brief discussion with everyone about this phenomenon.
During the motor testing process, if voltage or frequency regulation is used to start the motor, the starting process of the motor is relatively balanced. On the contrary, when the motor is started at the normal operating voltage, there will be a noticeable vibration phenomenon in the motor; Similarly, when a normally running motor suddenly loses power, similar phenomena occur, sometimes accompanied by noticeable noise.
Mechanical resonance effect
When the excitation frequency of the mechanical system in operation of the motor is close to the natural frequency of a certain stage of the system, obvious resonance phenomenon will occur, with obvious displacement resonance, and sometimes more obvious sound will be produced due to vibration. The vibration that occurs during the starting or power-off operation of the motor is a specific manifestation of resonance.
This type of problem also occurs during the use of variable frequency motors. Variable frequency motors may have particularly good operating effects in certain frequency bands, while there may be obvious electromagnetic noise in other frequency bands, and the fundamental reason is due to the effect of electromagnetic resonance.
The specific manifestation of inertia state change
The process of starting and stopping a motor is a process of inertia change, which refers to the process of changing the force on the operating object. The shorter the time of change and the greater the force, the more obvious the state change. The direct physical appearance is the vibration that can be felt by human intuition. For motor products, it may be the change in sound and displacement.
Therefore, it is necessary to fix the motor during installation and use, such as by fixing the motor foot surface, end cover flange surface with the installation reference, and adding other limiting measures if necessary. During the operation of the motor, fixed looseness may occur due to unavoidable vibration issues, so regular maintenance and upkeep are particularly necessary.
